Home > Products > Air Motors > Globe Vane Motors > V6

DOWNLOAD DATASHEETS

V6 Globe Vane Air Motor

V6 Vane Air Motor

Model: V6
Globe
Reversible 3.4kW vane air motor. Nema 56C, Foot Mounted, Face Mounted and D80 configuration available. ATEX rated II 2 GD c T5

Available From Stock

VA6C Nema 56C

VA6C info sheet.pdf VA6C info sheet.pdf
Size : 102.331 Kb
Type : pdf

VA6 Foot Mounted/ Face Mounted

VA6J&X info sheet.pdf VA6J&X info sheet.pdf
Size : 104.174 Kb
Type : pdf

VS6C D80 Configuration

VS6C - info sheet.pdf VS6C - info sheet.pdf
Size : 106.141 Kb
Type : pdf

MacScott Bond can provide spare parts.  If you need to replace something pleaselet us know. 

Polar Moment of Inertia 1.56 lb.ins2 (0.45 g.m2).

Max Overhung Force on motor shaft 70lbf (300N) Axial loads should be kept to a minimum. Consult MacScott Bond Ltd.

Temperature Range -4°F to +176°F / -20°C to +80°C

Some motors are capable of running oil free. Please ask MacScott Bond Ltd for more details.

Airline Filtration and Lubrication - Use a 64 micron filtration or better.  Choose a lubricator suitable for the flow required.  Prior to initial start-up, inject oil into the inlet port.  Lubricator drop rate: 5-6 drops/minute continuous operation. Lubrication drop rate 10-12 drop/minute intermittent operation.

All information as supplied by Globe.

Reading Graphs

Scales have been adjusted to enable bar and psi to be read from a common curve. Therefore
only read psi with the left hand axis and bar with the right hand axis.

Motor performance can be derived from the above graphs as in the examples shown.
Where motors are not required to start under load, such as fan drives, selection may be made using either Graph 1 or Graph 3 using the required running torque or power only. For applications where the motor starts under load, such as hoists, winches or track drives, the starting torque in Graph 2 must also be considered.  Starting torque varies between the maximum and minimum values shown, depending on the angular position of the output shaft.

VA6X Diagram Dimensions

The Globe Vane motors are most suitable for light duties and higher speed operations and can be supplied direct coupled to gearboxes.

A variety of operating conditions can be achieved by utilisation of pressure regulators and flow control valves.

The V6 weighs approximately 7.6kg (17lbs)- 11.3kg (25lbs) depending on mounting .

The motors are rated to ATEX directive 2014/34/EU, Group II Category 2 G D c T5 

V1 Vane Motor

Globe
Order Code:VA1

Compact and lightweight, reversible 0.44kW vane air motor. With 1/4" NPT inlet ports. ATEX rated II 2 GD c T5

V2 Vane Motor

Globe
Order Code:VA2C, VS2C, VA2J, VA2X

Lightweight, reversible 0.82kW vane air motor. With 3/8" NPT inlet ports. ATEX rated II 2 GD c T5

V4 Vane Motor

Globe
Order Code:VA4C, VS4C, VA4J, VA4X

Lightweight, reversible 2.1kW vane air motor. With 1/2" NPT inlet ports. ATEX rated II 2 GD c T5

V8 Vane Motor

Globe
Order Code:VA8C, VS8C, VA8J, VA8X

Lightweight, reversible 5.4kW vane air motor. With 1" NPT inlet ports. ATEX rated II 2 GD c T5

V10 Vane Motor

Globe
Order Code:VA10C, VS10C, VA10J, VA10X

Lightweight, reversible 9.5kW vane air motor. With 1 1/4" NPT inlet ports. ATEX rated II 2 GD c T5

V12 Vane Motor

Globe
Order Code:VA12C, VS12C,

Reversible 14kW vane air motor. With 2" NPT inlet ports. ATEX rated II 2 GD c T5

Can't find what you are looking for?  Give us a call or an email and find out how MacScott Bond can help.


MacScott Bond Ltd is a member of the MacTaggart Scott Group. The Loanhead Division, certified to ISO9001: 2008 and OHSAS 18001:2007, has a full design, manufacture, installation, service and repair capability for pneumatic, oil or water hydraulic and cooling systems. We sell hydraulic, pneumatic and associated components and are distributors for SPX, Globe, Atlas Copco, SPX Power Team, MP Filtri, ACE controls and more.


Please feel free to contact our sales team or one of our engineers for more information about how MacScott Bond can help you.

 

Tel: 0131 448 2950  |   enquiries@macscott.com  |  Fax: 0131 448 2941

ISO 9001 Quality Management System
OHSAS 18001 Occupational Health and Safety System

TERMS OF USE